BEMIPAR
Eretmocerus mundus
Unit of packaging
Eretmocerus mundus (parasitic wasp)
Pack size: 10 cardboard strips each with 5 cards wrapped in a box
Contains: parasitized whitefly pupae from which 3,000 parasitic wasps hatch
Target
Tobacco whitefly (Bemisia tabaci) in the second and third larval stage.
Rates | |||||
BEMIPAR | rate | m²/unit | interval (days) | frequency | remark |
preventive | 1½-3/m² | 1000-2000 | 7-14 | - | - |
curative light | 3-6/m² | 500-1000 | 7 | min. 3x | release until control is archieved |
curative heavy | 9/m² | 330 | 7 | min. 3x | release until control is archieved |
Introduction
- open package carefully inside the greenhouse
- bend strips and tear off. Start tearing opposite hang-up hole
- suspend the cards in the crop, if possible approximately 75 cm under plant head
- not in direct sunlight
- do not touch the pupae
Environmental conditions
Eretmocerus mundus performs best at a 24 hour average greenhouse
temperature greater than 20°C/68°F. However introductions can start
at lower temperatures. Also at higher temperatures (above 30°C/86°F)
Eretmocerus mundus stays active.
Storage and handling
- storage after receipt: 1-2 days
- storage temperature: 8-10°C/47-50°F
- in the dark
Remarks
- Eretmocerus mundus is less susceptible to pesticides than Encarsia formosa
- BEMIPAR, BETRIMIX and BEMIMIX are guaranteed to be absolutely free from TYLCV (tomato yellow leaf curl virus)
Appearance
Female adults: lemon-yellow
Male adults: brownish-yellow, thick antennae
Other stages: develop inside host. Pupae are easy to recognize. The larvae of the parasite move the intestines of the whitefly larvae to its periphery.
Mode of action
Female adult parasitic wasp parasitizes the larva of the whitefly. Host feeding also takes place.
Visual effect
After about 2 weeks, the first parasitized pupae can be seen in the crop. The parasitized whitefly pupa turns yellow in colour. The adult parasitic wasp emerges from the pupa through a round hole.
Important!
The introduction rates of this product should be adjusted to the mode of action of the product and the results that can be expected in the crop where the product is applied. Your local Koppert consultant or recognized distributor will be able to advise you further.
Only use products that are permitted in your country / state and crop.


