Horiver Dry

Active ingredient:
Sticky trap with dry glue
Product category:
Monitoring
  • For trapping and monitoring of different flying insects

  • No staining of glue to crop or hands

Horiver_Dry-1.jpg
  • For trapping and monitoring of different flying insects

  • No staining of glue to crop or hands

Use for

Use for

Use Horiver Dry for trapping and monitoring different flying insects. The traps work particularly well for bugs such as Lygus spp. and Nesidiocoris tenuis.

Pests

  • Yellow: Nesidiocoris tenuis
  • Blue: thrips
  • White: Lygus spp.

How it works

How it works

Mode of action

Insect pests are attracted to the colour of the sticky trap and get caught in the glue.

Product specifications

Product specifications

Presentation

Polysterene cards coated with dry sticky glue.

Available colours and sizes

  • Yellow: 10x25 cm; 20x25 cm; 20x40 cm
  • Blue: 10x25 cm; 20x25 cm; 20x40 cm
  • White: 10x25 cm; 20x25 cm; 20x40 cm

Numbers per package

  • 10x25 cm: 10 pieces
  • 20x25 cm: 20 pieces
  • 20x40 cm: 20 pieces

Directions for use

Directions for use

Application

  • Place traps in areas with high risk of pest infestation such as areas near doors, gable ends and lateral ventilation openings
  • Attach traps to wires or sticks at max. 30 cm above the crop and adjust height when plants are growing
  • Do not place traps in-between the plants as parasitic wasps will then also be trapped
  • Remove the silicone cover paper from both sides of the trap
  • Replace the traps when largely covered by insects and/or debris
Play

Dosage

  • For monitoring use one Horiver Dry per 200 m2
  • For trapping in hotspots use one Horiver Dry per 2 to 20 m2

Notes

  • In contrast to Horiver or Horiver Wet, the glue of Horiver Dry does not come off on your hands
  • Horiver Dry traps generally do not catch insects for as long as Horiver or Horiver Wet as the glue gets  saturated earlier with insects or dust and debris
  • The silicone cover paper is perforated and can be removed in sections if required for monitoring purposes 

Product handling

Product handling

Storage time

See Best before date.

Storage temperature

0-32°C/32-104°F.

Storage conditions

In a cool, dry place.

"The general conditions of Koppert (Koppert B.V. and/or of its affiliated companies) apply. Only use products that are permitted in your country/state and crop. Check local registration requirements. Koppert cannot be held liable for unauthorized use. Koppert is not liable for any loss of quality if the product is stored for longer than recommended and/or under incorrect conditions."