Natutec Vegetable Frame

Common name:
Full-automatic blowing device
Product category:
Application
  • Uniform and efficient distribution of natural enemies and no impact on the quality of natural enemies

  • Different natural enemies can be applied in one operation and more efficient than manual application

  • Tailor-made to the specifications of the greenhouse

Play
  • Uniform and efficient distribution of natural enemies and no impact on the quality of natural enemies

  • Different natural enemies can be applied in one operation and more efficient than manual application

  • Tailor-made to the specifications of the greenhouse

Use for

Use for

Use the Natutec Vegetable Frame for the distribution of natural enemies in high-wire crops. The Natutec Vegetable Frame can be used for field distribution on two sides of the path. It is equipped with a protection ring around the frame to avoid damage of the high-wires and crops.

How it works

How it works

Mode of action

The Natutec Vegetable Frame is mounted on a picking truck. The innovative combination of two blowers, one on each side, ensures a uniform release of carrier material containing natural enemies. The airflow from the fan guarantees a uniform distribution of this material up to a distance of 2*4 metres from the Natutec Vegetable Frame. The protection ring around the frame, protects all the high-wires cultivation and cables in the field.

Product specifications

Product specifications

Product components

The Natutec Vegetable Frame consists of the following components:

  • Two blowing devices on a standard which can be mounted on a picking truck
  • One protection ring to protect all the plant-wires and cables
  • Battery (24 Volt) with charger (the battery of the picking truck can also be used)
  • Two adjustable dosing pots and an adjustable mixing pot
  • Ear protector and mask

Volume of dosing pot/drum

3 litres.

Range

8 metres (4 metres on both sides).

Directions for use

Directions for use

Play

Application

  • Secure the Natutec Vegetable Frame on the picking truck
  • Select the required dosing pots
  • Adjust the size of the holes to the required dosage based on the information provided in the table on the underside of the pot
  • Fill the dosing pots with the material to be released and close the lid
  • Place the fully charged battery or connect the vegetable frame to the battery of the picking truck
  • Connect the cable to the battery
  • Attach the dosing pots to the revolving head of the blowers
  • Turn on the switch of the Natutec Vegetable frame to start releasing the material
  • Drive the picking truck over the path
Product handling

Product handling

Storage conditions

Store the Natutec Vegetable Frame and accessories in a dry and dust-free area. The Natutec Vegetable Frame can be stored in the supplied case. Always charge the batteries after use and leave them plugged in.

"The general conditions of Koppert (Koppert B.V. and/or of its affiliated companies) apply. Only use products that are permitted in your country/state and crop. Always comply with the conditions specified in local product registrations. Koppert cannot be held liable for unauthorized use. Koppert is not liable for any loss of quality if the product is stored for longer than recommended and/or under incorrect conditions."