Horiver Wetstick

Type:
Sticky trap with wet glue
Product category:
Monitoring
  • For trapping and monitoring different flying insects

  • With grid for easy counting (10x25cm)

  • Cut-out for easy and quick application

  • For trapping and monitoring different flying insects

  • With grid for easy counting (10x25cm)

  • Cut-out for easy and quick application

Use for

Use for

Use Horiver Wetstick for trapping and monitoring of different flying insects.

Pests

How it works

How it works

Mode of action

Insect pests are attracted to the colour of the sticky trap and get caught in the glue.

Product specifications

Product specifications

Presentation

Polysterene cards coated with wet sticky glue.

Available colours and sizes

  • Yellow: 10x25cm; 20x25cm; 25x40cm
  • Blue: 10x25cm; 20x25cm; 25x40cm
  • Black: 25x40 cm
  • Red: 10x25cm, 20x25cm
  • White: 10x25cm, 25x40cm
  • Green: 10x25cm, 25x40cm

Numbers per package

  • 10x25 cm: 10 pieces
  • 20x25 cm: 22 pieces
  • 25x40 cm: 12 pieces
  • Outer cards with glue at one side only
Directions for use

Directions for use

Application

  • Place traps in areas with high risk of pest infestation such as areas near doors, gable ends and lateral ventilation openings
  • Attach traps to wires or sticks at max. 30 cm above the crop and adjust height when plants are growing
  • Do not place traps in-between the plants as parasitic wasps will then also be trapped
  • For Tuta absoluta place black traps 15-25 cm above the ground for young plants and 50 cm above the ground for mature plants
  • Replace the traps when largely covered by insects and/or debris

Dosage

  • For monitoring use one Horiver Wetstick per 200 m2
  • For trapping in hotspots use one Horiver Wetstick per 2 to 20 m2
  • For trapping Tuta absoluta use at least one Horiver Wetstick trap per 100 m2

Combined use

Yellow Horiver Wetstick can be used in combination with Natutec Scout for easy identification and counting of insects trapped.

Product handling

Product handling

Storage time

See Best before date.

Storage temperature

0-32°C/32-104°F.

Storage conditions

In a cool, dry place.

"The general conditions of Koppert (Koppert B.V. and/or of its affiliated companies) apply. Only use products that are permitted in your country/state and crop. Always comply with the conditions specified in local product registrations. Koppert cannot be held liable for unauthorized use. Koppert is not liable for any loss of quality if the product is stored for longer than recommended and/or under incorrect conditions."